mx10-5-214-150 Exposure Settings

MOBOTIX M12 mx10-5-214-150 Exposure Settings

Attribute	Left	Right	Explanation
Automatic Contrast			Automatic Contrast: Off: no contrast enhancement. Standard: applies uniform contrast enhancement. Extended: applies non-uniform contrast enhancement. Aggressive: increases image contrast even more but may result in unnatural images. Factory default: Standard
Brightness			Brightness: Factory default: 0
Backlight Correction			Backlight Correction: Factory default: 4
Attribute	Left	Right	Explanation
Exposure Control			Exposure Mode: Full Image Area: uses the full image to optimize exposure according to exposure windows, ideal for full image recording. Visible Image Area: optimizes exposure according to the visible image section, ideal for vPTZ. Factory default: Full Image Area
			Exposure Windows: Select from exposure windows relative to a full image. Custom Windows allows for arbitrary exposure windows. Factory default: Quarter
	0,224,168,832,624 1,224,168,832,624		Custom Windows: Format: Lens, x, y, width, height[, in/out] Lens: 0=right, 1=left. Note: All user-defined coordinates are relative to the whole sensor. The origin (0,0) corresponds to the lower left corner, 1279,959 to the upper right corner.
			Exposure Weighting: Weight between exposure windows and the rest of the image for exposure control. Factory default: 100%
			White Balance Weighting: Weight between exposure windows and the rest of the image for white balance. Factory default: Total
			Show Windows: Show exposure windows as green and red boxes. If you select Off, the windows will only be displayed when you explictly change them.
Target Brightness			Average Brightness: Average brightness inside exposure window. Affects exposure time. Factory default: 40%
			Minimum Average Brightness: Compensate shorter exposure time by software amplification (could increase image noise). Factory default: 20%
Night Improvement			Enable Night Improvement: Amplification for dark images. Could increase image noise.
Exposure Time			Exposure Program: Select an exposure program. 0: Standard program. Negative: Tends to reduce exposure time; could increase image noise. Positive: Increases exposure time to reduce image noise.
			Max. Exposure Time: Maximum exposure time in seconds (e.g. 1/90s = 11ms).
			Min. Exposure Time: Minimum exposure time in seconds (e.g. 1/90s = 11ms).
Frequency of Power Supply			Line Frequency: Select the frequency of your power supply to avoid interferences. Use 60 Hz for USA and Canada, 50 Hz for Europe and Asia and Ignore if the camera is exposed to daylight. Factory default: 50 Hz